We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Substrate Cleaning Equipment.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Substrate Cleaning Equipment - List of Manufacturers, Suppliers, Companies and Products

Substrate Cleaning Equipment Product List

1～3 item / All 3 items

Displayed results
Dual-Sided Edge Surface Board Cleaning Device 'NCWS-250II'

Dual-Sided Edge Surface Board Cleaning Device 'NCWS-250II'

The height of the brush is automatically adjusted! It performs cleaning on the surface, back, and edges of the circuit board.

The "NCWS-250II" is a device that cleans dust adhering to the surface, back, and edges of a circuit board using a brush. It detects brush wear and automatically adjusts the brush pressure to maintain consistent cleaning conditions. The brush height adjustment is automatically made based on a set value corresponding to the thickness of the circuit board. It is also possible to automatically switch models based on information from higher-level systems. 【Features】 ■ Detects brush wear and automatically adjusts the brush pressure to maintain consistent cleaning conditions. ■ The brush height adjustment is automatically made based on a set value corresponding to the thickness of the circuit board. ■ Registers models according to the operating mode (registering parameters such as double-sided, top side, edge presence/absence, board thickness, and pressure). ■ Starts operation based on model selection. ■ It is also possible to automatically switch models based on information from higher-level systems. *For more details, please refer to the PDF document or feel free to contact us.

  • Other cleaning machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double-sided circuit board cleaning device 'NCW-250'

Double-sided circuit board cleaning device 'NCW-250'

The air blow from above removes the debris inside the through hole!

The "NCW-250" is a device that cleans debris and dust attached to the circuit board using brushes on both sides. The brush units for the top and bottom automatically raise and lower according to the operating mode, and debris inside the through holes is removed by air blowing from above. It is equipped with mechanisms to detect contact between the circuit board and the brushes, as well as to detect filter clogging in the dust collector. The structure allows for easy removal for cleaning and brush replacement of the brush units. 【Features】 ■ Simultaneously cleans debris attached to the top and bottom of the circuit board with brushes. ■ The brush units for the top and bottom automatically raise and lower according to the operating mode. ■ Debris inside the through holes is removed by air blowing from above. ■ The structure allows for easy removal for cleaning and brush replacement of the brush units. ■ An ionizer is standardly equipped on both the top and bottom sides of the circuit board discharge side. *For more details, please refer to the PDF document or feel free to contact us.

  • Other cleaning machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Upper substrate cleaning device 'NC-250'

Upper substrate cleaning device 'NC-250'

No need for brush height adjustment! It operates with a constant contact value regardless of changes in the board thickness.

The NC-250 is a device that cleans debris and dust adhered to the surface of the circuit board using a brush. Cleaning is performed using a combination of a brush and air blow, and debris inside the through holes is removed by air blowing from the top. The cleaning of the brush unit and the replacement of the brush are designed to be easily detachable. Additionally, since the brush comes into contact with the circuit board, height adjustment of the brush was previously necessary due to the thickness of the board, but now it is no longer required thanks to the board thickness tracking feature. 【Features】 ■ Cleans debris adhered to the surface of the circuit board using a brush and air blow ■ The brush unit automatically raises and lowers according to the operating mode ■ Removes debris inside the through holes by air blowing from the top ■ The cleaning of the brush unit and the replacement of the brush are designed for easy detachment ■ An ionizer is standardly equipped on the top surface of the circuit board discharge side *For more details, please refer to the PDF document or feel free to contact us.

  • Other cleaning machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.